Answers

1. How much of the vehicle weight is placed on the Tow Dolly?
A. If your vehicle is front wheel drive, 2/3 of the gross vehicle weight transfers to the Tow Dolly. If your vehicle is rear wheel drive, 1/3 of the gross vehicle weight transfers to the Tow Dolly.
Back to Top

2. What size tires and wheels are used on the Tow Dolly?
A. 205-75-R 14 LRC Tires with 14"-5.5" Wheels.
Back to Top

3. What is caster action steering, and why is it better than other steering systems?
A. Caster Action steering uses the same principle as a steering axle on a car. The wheel moves independently while the fender stay stationary. Also, Landgrebe Mfg. is the only company that offers a Tow Dolly that has non steering fenders. This reduces chances of damage to your vehicle.
Back to Top

4. What size straps will I need?
A. This depends on tow vehicle being towed.

12" Small 13"-14" Medium or Regular 15" Large 16" Extra Large

Back to Top

5.Why do we use metal fenders rather than plastic fenders?
A. Metal fenders have high impact strength, and handle weather conditions better than plastic.
Back to Top

6. What is the 4-way plug, which is on the driver's side of the TD40?
A. This plug is provided on the TD40 left fender for lightbar hookup.
Back to Top

7. What kind of Grease is used in the HUB Assembly?
A. High temperature Lithium Grease.
Back to Top

8. What kind of paint is used on the Dolly?
A. There are five steps involved in the painting process.

Steel wash Acid wash Oxide primer Acrylic enamel (gray or brown) Clear Coat

Back to Top

9. Is it necessary to title and or license the Tow Dolly?
A. Laws very from state to state: contact your state MVB for the most current laws.
Back to Top

10. What are the advantages of an A-Frame tongue?
A. An A-Frame tongue is much stronger than a single tubular tongue. It allows a pulling capacity of 5000 lbs.
Back to Top

11. What options are available for the TD40 Dolly?
A. Hydraulic Brakes, Electric Brakes, Lightbar, Mud Deflectors, Hand Winch, Jack, Spare Tire and Wheel.
Back to Top

12. What is the overall capacity of the TD40 96" model and TD40 101" Model?
A. Both Dollies have an axle capacity of 3,500 lbs. and 5,000 lbs. pulling capacity. The TD40 96" will haul a vehicle 72" wide, tire to tire width. The TD40 101" will haul a vehicle 78" wide, tire to tire width.
Back to Top

13. Can the Tow Dolly be towed without a vehicle on it?
A. Yes, you can tow the dolly without a vehicle on it. First, you need to lower the pressure on the tires to compensate for the lack of weight on the dolly (by lowering the tire pressure, it makes it less likely for your dolly to vibrate when you are traveling at maximum speeds or on rough terrain). Second, immobilize the steering system on the dolly (use your steering lock pin). Read your manual.
Back to Top

14. What size hitch ball will I need?
A. A 2" ball.
Back to Top

15. Can the TD40 Tow Dolly be backed up?
A. It is NOT RECOMMENDED but possible with steering system locked using caution. Check your manual.
Back to Top

16. Does the Dolly have a Warranty and what does it cover?
A. Yes, be sure to get one from your Dealer and read this to check what it covers.
Back to Top

17. What is a lightbar and is it required?
A. A lightbar is an aluminum bar that is used on the vehicle being towed for additional safety (some states require the use of a lightbar... Check with your state).
Back to Top

18. Will ground effects and other features on special car models interfere with the loading and unloading of the TD40?
A. Vehicles with low ground clearance or rear wheel drive vehicles may need a 2' x 6' stud 3' long, place under loading ramp for easier loading.
Back to Top

19. What is the proper hitch height?
A. 16" to 18" is the proper hitch height.
Back to Top