Home
Our Products
Specs
Testimonials
FAQ
Contact Us
 

TD 40 101 Specifications

MODEL TD 40 101
Total Unit Weight 555 lbs
Tongue Weight 58 lbs
Spare Tire and Wheel Add 40 lbs
Electric Brakes 40 lbs less
Total Length: Hydraulic Brakes 123"
Total Length: Electric Brakes 123"
Electric Brakes Overall Width 103.5"
Inside Fender 85"
Outside Ramps 78"
Distance Between Ramps 40"
Ramp Width Each 19"
205 75 R14 LRC Tires 1820 lbs Capacity Each 50 lbs Air
Total Load Capacity 3500 lbs Spindle Capacity
Tow Capacity: Electric 5000 lbs
Tow Capacity: Hydraulic 6000 lbs
  • 10"x2 ¼" Drum type Brakes Electric or Hydraulic
  • Wired with 4 way flat with Hydraulic Brakes
  • 7 way Bargeman with Electric Brakes
  • 2" Ball required
  • 19 " top of Ball Hydraulic
  • 18 ½" top of Electric
  • 5 bolt 4 ½" Bolt Circle
  • ½ " offset mod wheels 3 ¼ pilot
  • Caster Action Steering with stabilizer tie rod with Heim Bearings
  • Ramp loading angle tilted approximately 14 degrees
  • Main Frame and Tongue 2x2x3/16 tubing
  • All wiring and plumbing run inside Frame double insulated
  • 4 way flat provided at rear of drivers side of fender for towed vehicle
  • Paint Codes: Body 325N119 Dark Smoke, Tongue 325N121 Lt Smoke, Industrial Primer Sealer and Acrylic Enamel with clear coat on top
  • Safety chains 5/16 proof coil 30 plus
  • Safety Cable for Towed Vehicle
  • Ramp height 9"
  • Ramp to top of Fender: 19"
  • Ground to Top of Fender: 28"
  • Approximate dimension center-line of towed vehicle axle to ball: 82"