Home
Our Products
Specs
Testimonials
FAQ
Contact Us
 

TD 40 101 Magnum Specifications
Standard Plus 4"

MODEL TD 40 101 Magnum
Total Unit Weight 725 lbs
Tongue Weight 60 lbs with Hydraulic Brakes
Spare Tire and Wheel Add 42 lbs
Electric Brakes 40 lbs less
Total Length: Hydraulic Brakes 133"
Total Length: Electric Brakes 125"
Electric Brakes Overall Width 105.5"
Inside Fender 89"
Outside Ramps 82"
Distance Between Ramps 42"
Ramp Width Each 20"
205 75 R15 LRC Tires 1820 lbs Capacity Each 50 lbs Air
Total Load Capacity 3500 lbs Spindle Capacity
Tow Capacity: Electric 7000 lbs
Tow Capacity: Hydraulic Surge 7000 lbs
  • 10"x2 ¼" Drum type Brakes Electric or Hydraulic
  • Brake-Away included on this system
  • Wired with 4 way flat with Hydraulic Brakes
  • 7 way Bargeman with Electric Brakes
  • 2 5/16 " Ball required for both brake systems
  • 19 ½" top of Ball Hydraulic
  • 18 ½" top of Electric
  • 6 bolt 5½" Bolt Circle
  • ½ " offset mod wheels 3 ¼ pilot
  • Caster Action Steering with stabilizer tie rod with Heim Bearings
  • Ramp loading angle tilted approximately 14 degrees
  • Main Frame and Tongue 2x2x1/4 tubing
  • All wiring and plumbing run inside Frame double insulated
  • 4 way flat provided at rear of drivers side of fender for towed vehicle
  • Paint Codes: Body 325N119 Dark Smoke, Tongue 325N121 Lt Smoke, Industrial Primer Sealer and Acrylic Enamel with clear coat on top
  • Safety chains 5/16 proof coil 30 plus
  • Safety Cable for Towed Vehicle
  • Ramp height 10"
  • Ramp to top of Fender: 19"
  • Ground to Top of Fender: 29"
  • Approximate dimension center-line of towed vehicle axle to ball: 91"